Close
Print
| Make | SVEDALA incl. BABBITLESS & DENVER |
| Model | VSI 3000 (1100 Series Barmac Duopacter Crushers) |
Application |
Recommendation |
Capacity (gal) |
|
|---|---|---|---|
|
Bearing cartridge, all speeds, feed material temperature; 60°C to 100°C
|
(b) |
1.32
(a)
|
|
|
Bearing cartridge, normal service, high speed, feed material temperature: -20°C to 65°C
|
(c) |
1.32
(a)
|
|
|
Bearing cartridge, normal service, low speed, feed material temperature: -20°C to 65°C
|
FS SPECTRA LUBE GRAY GREASE |
1.32
(a)
|
|
Oil Change Intervals
Bearing cartridge, all speeds, feed material temperature; 60°C to 100°C
| Hours Min | 8 |
| Hours Max | 10 |
Bearing cartridge, normal service, high speed, feed material temperature: -20°C to 65°C
| Hours Min | 8 |
| Hours Max | 10 |
Bearing cartridge, normal service, low speed, feed material temperature: -20°C to 65°C
| Hours Min | 8 |
| Hours Max | 10 |
Lubricant / Capacity Notes
| a. | Grease quantity per nipple |
| b. | Svedala recommend Mobilith SHC 220, Shell Stamina U2, BP Synthetic HT-XP. If the Shell or BP grades are used the system must be completely cleaned as these grades are not compatible with Mobilith SHC 220 |
| c. | Svedala recommend Mobilith SHC, Castrol Optimol Longtime PD2, Arcanol L135D, Kluber Isoflex Topas NB152. If Kluber Isoflex is used, the system must be completely cleaned as this grease is not compatible with the others |