Close Print
Make RENAULT TRUCKS
Model 440.18 4x2 AGV95 E-Tech (Magnum Tractors Euro3)
Engine DT
Year 2001-
Application
Recommendation
Capacity (gal)
Engine (DT)
FS SUPREX GOLD ESP 15W-40 PREMIUM HEAVY DUTY ENGINE OIL (a, b)
9.51
Transmission
  (c, d)
2.64 / 3.17
Differential
FS ALL-PURPOSE GEAR LUBE GL-5 80W-90 (e)
3.83 - 4.76
Brake & Clutch Fluid
 
0.132
Power Steering
FS SYNTHETIC MULTI VEHICLE ATF
1.19
Cab Tilt System (< -15°C)
 
0.396
Cab Tilt System (> -15°C)
FS SYNTHETIC MULTI VEHICLE ATF
0.396
Chassis Grease
 
Suspension Swivels
FS ALL-PURPOSE GEAR LUBE GL-5 80W-90
Swivel pins, wheel hubs, universal joints & sleeves
FS SPECTRA LUBE GRAY GREASE
General chassis lubrication
FS SPECTRA LUBE GRAY GREASE
Hydra Pak
FS INDUSTRIAL HYDRAULIC ISO 46

Oil Change Intervals

Engine (DT)
Miles Max 25000
Months Max 24
Transmission
Miles Min 56250
Miles Max 187500
Months Min 12
Months Max 24
Differential
Miles Min 56250
Miles Max 187500
Months Min 12
Months Max 24

Lubricant / Capacity Notes

a. Oil change intervals: all current Euro3, 4 and 5 models have either fixed interval servicing or predictive maintenance intervals based on operating conditions, lubricant specification/grade, fuel sulphur content, etc fed into cab processor. The readout also depends on the type/make of engine, transmission and final drive fitted to each individual model. Intervals shown are the maximum and minimum fixed mileages for all variations of conditions and components. Refer to handbook for specific models
b. Alternative recommendations: EO RVI RD 15W-30; EO RVI RD 15W-40; EO RVI RLD 15W-30; FS SUPREX GOLD ESP 15W-40 PREMIUM HEAVY DUTY ENGINE OIL; EO RVI RXD 5W-30
c. ASTronic transmission + intarder where fitted: use oils as for ZF transmissions
d. Alternative recommendations, ZF/Eaton: GO ZEF 13010; CF-4 40; SF 40
e. Drive axles P669/920SL/1120SL/1121/1340/1341/1342/1345/1395/1541/1545 and PMR 2140/2141 with hubs or reduction gears, FS ALL-PURPOSE GEAR LUBE GL-5 80W-90; P1170/1370 and hubs, FS ALL-PURPOSE GEAR LUBE GL-5 85W-140. Renault recommend GL-5 oils conforming to oxidation test CEC L48A95 at 140°C